Ccd-Raw - FujiFilm FinePix S5000 Owner's Manual

VIEWING YOUR IMAGES ( PLAYBACK )
PLAYBACK MODE
Single-frame playback
Press the "BACK" button
to cancel playback zoom.
Playback zoom
Zoom bar
ＯＫ ＯＫ ＴＲＩＭＭＩＮＧ ＴＲＩＭＭＩＮＧ
Pressing the "T" or "W" button during single-
frame playback zooms (enlarges) the still image.
When you do this, a zoom bar is displayed.
h Zoom scales
2816 × 2120 pixel images : Max. 18×
5
2048 × 1536 pixel images : Max. 13×
3
1600 × 1200 pixel images : Max. 10×
2
1280 × 960 pixel images : Max. 8×
1
G
!
You cannot use multi-frame playback during playback
zoom.
Trimming
ＴＲＩＭＭＩＮＧ ＴＲＩＭＭＩＮＧ
１Ｍ １Ｍ
ＲＥＣ ０Ｋ？ ＲＥＣ ０Ｋ？
ＯＫ ＯＫ ＲＥＣ ＲＥＣ BACK BACK ＣＡＮＣＥＬ ＣＡＮＣＥＬ
28
Panning
ＯＫ ＯＫ ＴＲＩＭＭＩＮＧ ＴＲＩＭＭＩＮＧ
You can view another area by pressing "a",
"b", "d", or "c".
The size of the saved image varies depending
on the zoom ratio. If the image size is 1
Ω
less, the " TRIMMING" display disappears
and you cannot save the image trimmed. For
CCD-RAW files, " Ω TRIMMING" is not
displayed and trimmed images cannot be saved.
Press the "MENU/OK" button
to crop the image.
Check the size of the saved image and press the
"MENU/OK" button. The cropped image is added
as a separate file in the final frame.
I Image Sizes
3 Best for A5 to A4 size prints
2
Best for A6 to A5 size prints
1
Best for A6 size prints
PLAYBACK MODE
1
2
1 0
ＥＲＡＳＥ ＥＲＡＳＥ
ＡＬＬ ＡＬＬ ＦＲＡＭＥＳ
ＦＲＡＭＥ ＦＲＡＭＥ
ＢＡＣＫ ＢＡＣＫ
or
3
ＥＲＡＳＥ ＥＲＡＳＥ
ＡＬＬ ＦＲＡＭＥＳ ＡＬＬ ＦＲＡＭＥＳ
ＦＲＡＭＥ ＦＲＡＭＥ
ＢＡＣＫ ＢＡＣＫ
0 1
4
ＦＲＡＭＥ ＦＲＡＭＥ
ＯＫ ＯＫ
0 1
ERASING IMAGES ( ERASE FRAME )
Set the Power switch to "
1 Press the "MENU/OK" button during playback to
2 0
display the menu.
2 Press "d" or "c" to select "
ＦＲＡＭＥＳ
Note that mistakenly erased frames (files) cannot
be recovered. You should back up important
frames (files) that you do not want to be erased
onto your computer or other media.
1 Press "a" or "b" to select "FRAME".
2 Press the "MENU/OK" button to confirm the
selection.
See P.61 for information on "ALL FRAMES".
0 2
G
!
Press "a" or "b" to select "
button to return to single-frame playback.
G
!
Press the "BACK" button to cancel erasing single frame.
1 Press "d" or "c" to select the frame (file) to be
１００−０００９ １００−０００９
erased.
2 Press the "MENU/OK" button to erase the
displayed frame (file).
To erase another image, repeat steps 1 and 2.
ＥＲＡＳＥ ＯＫ？ ＥＲＡＳＥ ＯＫ？
ＹＥＳ ＹＥＳ BACK BACK ＣＡＮＣＥＬ ＣＡＮＣＥＬ
2 0
G
!
Pressing the "MENU/OK" button repeatedly erases
consecutive images. Take care not to erase an image by
mistake.
w
".
o " ERASE.
Q BACK" and press "MENU/OK"
29