Handset Ringer Style/Battery Save; Temporary Tone Dialing; Headset Jack - AT&T 9371 User Manual

9371_book_1ATT 8/14/01
TELEPHONE OPERATION
AT THE HANDSET

Handset Ringer Style/Battery Save

You can select from four different handset ringer styles, or turn the ringer
off and extend the battery life.
1
Make sure the handset is off.
Press p to enter programming mode.
2
Press > until the screen displays RINGER:and the current setting.
3
Press s; the current setting blinks.
4
Press > to select 1, 2, 3, 4, or OFF. You will hear a sample
5
of each ring.
Press s or p to choose the displayed ringer setting.
6

Temporary Tone Dialing

If you have dial pulse (rotary) service, you can change from dial pulse
to touch tone dialing during a call by pressing *. This is useful if you
need to send touch tone signals for access to telephone banking or
long-distance services.
1
Dial the number.
Press *. Buttons pressed after this send touch tone signals.
2
3
After you hang up, the phone automatically returns to
dial pulse (rotary) service.

Headset Jack

You can use this telephone hands-free when
you install any AT&T 2.5 mm headset,
purchased separately.
Plug the headset into the jack located
on the right side of the handset
(under the small rubber flap).
Do not force the connection,
but make sure the plug
fits securely.
8
10:00 AM Page 8