Table of Contents
Advertisement
T E L E P H O N E O P E R A T I O N
Handset Volume
Adjust volume of what you hear
through the handset.
Make or Answer a Call
Lift handset from base
— OR —
Press P.
Flash/Call Waiting
Access special telephone
company subscriber services.
Temporary Tone Dialing
Press to change from dial pulse
to touch tone dialing during a
call. This is useful if you have
dial pulse (rotary) service and
need to send touch tone signals
for access to telephone banking
or long-distance services.
1
Dial the number.
Press *. Buttons pressed
2
after this send touch tone
signals.
3
After you hang up, the
phone automatically returns
to dial pulse (rotary) service.
the last number dialed (up to 24 digits).
3
Headset Jack
You can use this telephone
hands-free when you install a
2.5 mm headset (SKU 24099),
purchased separately.
Plug the headset into the jack
under the small rubber flap. Do
not force the connection, but
make sure the plug fits securely.
End a Call
Place handset in base
Exit programming.
Cancel a page.
Press P, then press R to call
Change Channel
Switch to a clearer channel.
Handset Ringer Style/
Battery Save
Select from four different handset
ringer styles, or turn the ringer
off and extend battery life.
1 Make sure the handset is off.
2 Press G, #.
3 Press 1, 2, 3 or 4 to select
your ringer style (you will
hear a sample), or press 5
to turn the ringer off.
4 Press M.
When the ringer is off, select a
ringer style to turn it on again.
— OR —
Press O.
Redial
Advertisement
Table of Contents
