Changing The Headlight Bulb - KTM Freeride 250 R Owner's Manual

15 ELECTRICAL SYSTEM
15.8

Changing the headlight bulb

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
–
Position the headlight mask and fix it with the rubber band
Info
Make sure that the holding lugs engage in the fender.
–
Position the brake line and wiring harness
B01041-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Turn rubber cap
the way and remove it.
–
Pull bulb socket
602813-10
–
Press headlight bulb
pull it out.
–
Insert the new headlight bulb.
Headlight (S2/socket BA20d) (
–
Insert the rubber cap with the bulb socket into the reflector and turn it clockwise
all the way.
Info
Ensure that O-ring
100862-10
–
Insert the bulb socket of the parking light into the reflector.
Finishing work
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (

p. 77)

together with the underlying bulb socket counterclockwise all

of the parking light out of the reflector.

lightly into the bulb socket, turn it counterclockwise, and
p. 96)

is seated properly.
p. 77)

.
.
p. 75)
p. 75)
76