Package Contents; Connecting To Power - Paradyne SNE2020G-S Installation Instructions Manual

2-port network extenders
Hide thumbs Also See for SNE2020G-S:
Table of Contents

Advertisement

9. Upon such termination, the Licensee shall refrain from any further use of the
Software and destroy the original and all copies of the Software in the possession of
Licensee together with all documentation and related materials.
10. This Agreement shall be governed by the laws of the State of Florida, without
regard to its provisions concerning conflicts of laws.

Package Contents

Unpack and Inspect the Equipment. The following components should be included:
1 SNE2020G
1 Power supply
If there is any visible damage, do not attempt to connect the device. Contact your sales
or service provider.

Connecting to Power

Plug the power supply into the Power Adapter port on the back of the SNE2020G and
connect it to your power source. Verify that the Power LED on the front of the
SNE2020G is illuminated.
Upon start up, the Ethernet link will remain disabled (as indicated by solid illumination of
the Ethernet Rx, Tx, and Lnk LEDs) until at least one of the two SHDSL connections has
been established.
3
1 2 3 4
04-17573

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sne2020g-p

Table of Contents