Table of Contents
Advertisement
9. Upon such termination, the Licensee shall refrain from any further use of the
Software and destroy the original and all copies of the Software in the possession of
Licensee together with all documentation and related materials.
10. This Agreement shall be governed by the laws of the State of Florida, without
regard to its provisions concerning conflicts of laws.
Package Contents
Unpack and Inspect the Equipment. The following components should be included:
1 ENE2000
1 Power supply
If there is any visible damage, do not attempt to connect the device. Contact your sales
or service provider.
Powering Up the ENE2000
Plug the power supply into the power adapter port on the back of the ENE2000 and
connect it to your power source.
Verify that the Power LED on the front of the ENE2000 is illuminated.
NOTE: Upon start up, the Ethernet link will remain disabled (as indicated by solid
illumination of the Ethernet 100, Act and Lnk LEDs) until the E1 connection has been
established.
3
1 2 3 4 5 6 7 8
05-17640
05-17639
Advertisement
Table of Contents
