Paradyne SNE2020G-S Installation Instructions Manual page 10

Table 5. LEDs (2 of 2)
LED
Ethernet Rx
Ethernet Tx
Ethernet Lnk
* A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a
more rapid, less constant rate.
If both SHDSL connections are lost, the Ethernet connection will automatically be
disabled (as indicated by solid illumination of the Ethernet Rx, Tx and Lnk LEDs). Upon
reestablishment of at least one of the SHDSL links, the Ethernet connection will be
reinstated and the Ethernet LEDs will reflect current Ethernet status.
State Indication
Flashing Ethernet activity
Amber*
Solid Amber Heavy Rx traffic
No No activity
Illumination
Flashing Ethernet activity
Amber*
Solid Amber Heavy Tx traffic
No No activity
Illumination
Solid Green Ethernet
connection is
established
No No Ethernet
Illumination connection
Additional Information
The SNE2020G is receiving
data from the Ethernet
network.
The SNE2020G is receiving
large amounts of data from the
Ethernet network. A solid
amber Ethernet Rx LED can
also signify a lost SHDSL
connection.
Either there is no Ethernet link
or a link exists but there is no
activity.
The SNE2020G is transmitting
data across the Ethernet
network.
The SNE2020G is transmitting
large amounts of data across
the Ethernet network. A solid
amber Ethernet Tx LED can
also signify a lost SHDSL
connection.
Either there is no Ethernet link
or a link exists but there is no
activity.
A solid green Ethernet Lnk
LED can also signify a lost
SHDSL connection.
The Ethernet Rx and Tx LEDs
will remain unlit by default.
10