Setup Menu - Panasonic viera SC-HTB690 Operating Instructions Manual

Setup menu

1 Press [SETUP] repeatedly to select
the setup item.
2 Press [4] [3] repeatedly to select
the desired setting and then press
[OK].
Dims the display after
5 seconds of inactivity.
DIMMER
ON
OFF
A beep sounds when the
touch key on the main unit is
operated and when the unit is
turned on or off.
BEEP
≥ This works during muting as
well.
ON
OFF
The main unit automatically is
turned off if there is no audio
input and when you do not
use it for approx. 20 minutes.
ON
AUTO POWER
OFF
DOWN
≥ When this is set, the display
shows "P.OFF 1" to indicate
that the main unit will turn
off in approximately 1
minute.
Sets the volume limit to 50
when you turn on the main
unit although the volume is
VOL
set to above 50 before it is
LIMITATION
turned off.
ON
OFF
This function allows you to
connect a paired Bluetooth
device when the main unit is
in standby mode.
ON
OFF
BLUETOOTH
The main unit will be turned
STANDBY
on automatically when you
connect a paired Bluetooth
device.
≥ If this function is set to
"ON", the standby power
consumption will increase.
24
SQT0852
LINK MODE
VIERA LINK
≥ The default setting is underlined. Changed settings will
be kept until it is changed again, unless otherwise
indicated.
®
®
Change the Bluetooth
connection link mode to suit
the connection type. Make
sure that the Bluetooth
device is not connected
("BLUETOOTH READY" is
indicated on the display).
MODE 1: Emphasis on
connectivity.
MODE 2: Emphasis on sound
quality.
Turn on the VIERA Link
function.
ON
OFF
Select "OFF" when your
HDAVI Control device does
not work correctly with this
system.
≥ ARC will be disabled.
Connect an optical digital
audio cable.
≥ Turn off all connected
devices and then turn them
on again after changing the
setting.
®
®