Setup Menu - NextBase NBDVR101 Instruction Manual

SETUP MENU

There is a Setup menu for the general settings, press the MENU (M) button twice on the rear of the
device to access the menu. The options and settings available are described below.
To change a setting, select the chosen option using the up and down buttons and press the OK
button to confirm.
1. Language
Set the language on the iN-CAR CAM as required.
Options: English, Deutsch, Français, Español, Nederlands, Norsk, Suomi ou Svenska
Default Setting: English
2. Date & Time
Set the date & time on the iN-CAR CAM. Use the up and down buttons to change variable and
press the OK button to save the change and move to the next variable.
Pressing OK finally, will save the date and time settings.
3. Format SD Card
Format the memory card, this will delete all content.
4. Exposure
Adjust the amount of light received by the sensor.
Settings: +3, +2, +1, 0, -1, -2 or -3
Default: 0
5. Screen Saver
Turn on the Screen Saver function, this will cause the screen to turn off after a period of inactivity.
Options: Off, 10 Seconds, 30 Seconds or 2 Minutes
Default Setting: Off
Note:
- After the preliminary SETUP has been carried out upon the iN-CAR CAM, change the Screen Saver
setting to 10 Seconds, this will blank the screen automatically shortly after starting the vehicle and
the screen will NOT be a distraction in any way to the driver.
20