Siemens Motion SX binax User Manual page 25

Setting the focus manually:
If you have several hearing programs, change to
hearing program 1.
Press the rocker switch that is set for this function.
The mid level is active by default.
Press the upper rocker switch to focus more to the
front, or the lower rocker switch to listen to the
broader environment.
This function is intended for unique and temporary
listening situations. The hearing instruments thus return
automatically to the automatic setting of program 1 if
the sound environment changes significantly or after
approximately 45 minutes. You can also exit the spatial
configurator mode.
Exiting spatial configurator mode:
Toggle to the minimum or maximum level.
An optional signal tone can indicate the minimum and
maximum level.
Toggle one step further.
The same signal tone as for changing the hearing
program is played, indicating that you have exited the
spatial configurator mode.
25