inStaLLation (Snv-5080)
Disassembling
To connect the alarm in/out, the dome cover and lens cover are to be separated.
1. Using the L-wrench provided, loosen 3 screws
by turning them counterclockwise and
separate the dome cover.
2. Lift up the inner cover while gently pressing
its both ends to separate it from the unit.
3. Loosen 3 screws by turning them
SNV-5080-5
counterclockwise, press both left and right
lock releases inwards (in arrow direction) to
unlock the stopper, and then separate the
camera from the case.
SNV-5080-6
SNV-5080-9
SNV-5080-1
SNV-5080-2
SNV-5080-5
SNV-5080-3
SNV-5080-6
Case
SNV-5080-9
SNV-5080-7
SNV-5080-10
SNV-5080-1
Dome Cover
SNV-5080-2
Inner Cover
Camera Body
English _29