Panasonic DMR-HWT250 Operating Instructions Manual page 69

The images do not appear on the TV.
The picture is distorted during play, or video
is not played correctly.
• Check the connections. (
• Check the settings of the connected TV, etc.
• An incorrect resolution is selected in "HDMI
Video Format". ( 61) Reset the setting as
follows:
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
• The "INFO1" indicator on the unit will flash.
2 Press [1] repeatedly until the "REC" and
"INFO2" indicators on this unit start flashing.
3 Press and hold [OK] for at least 3 seconds.
Set the item again.
• Picture may not be seen when more than
4 devices are connected with HDMI cables.
Reduce the number of connected devices.
• The picture may be distorted or a black screen
may appear between scenes recorded with
different aspect ratios.
• Set "Deep Colour Output" (
Type Flag" ( 61) to "Off".
3D video is not output correctly.
• 3D video may be output correctly by changing
the following settings:
- "3D Type" of "3D Settings" (
- "Signal Format" (
playback)
• Check the settings of the connected TV.
• When a non-3D compatible amplifier/receiver is
connected between this unit and a TV, 3D video
is not output. ( 13)
• [HWT250] When "HDMI Audio Output" is set to
"Off", 3D video may not be output correctly.
( 61)
12)
61) or "Contents
61)
36, 3D settings during
Sound
No sound.
Distorted sound.
• Check the connections. (
• Check the settings of the connected TV, etc.
• Select the audio with "Multi Audio". (
• [HWT250] To output audio from a device
connected with an HDMI cable, set "HDMI Audio
Output" to "On". ( 61)
Cannot change audio channel.
• You cannot change the audio channel if "Digital
Audio Output" is set to "Bitstream" (
Recording, timer recording and
copying
Cannot record.
Cannot copy.
• Some broadcasts are copyright protected.
Timer recording does not work properly.
• When is displayed on the screen. (
• Because the actual broadcast time may be
different from the time displayed on the TV
Guide, we recommend you set the start time
earlier and the end time later by some minutes,
up to a maximum of 10 minutes.
Troubleshooting
12)
19, 35)
60)
30)
69
SQT0993