Panasonic DMR-HWT250 Operating Instructions Manual page 64

Convenient functions
Basic Settings
Others
Standby Settings
Quick Start
• On:
It is possible to start quickly from standby
mode.
• Off:
Power consumption in standby mode is
minimised. ( 73)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start:
"Quick Start" is activated when the set time
comes.
• When "Home Network function" (
Anywhere" ( 63) is set to "On", the setting for this
function is fixed to "On".
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
• When "REWIND LIVE TV" is set to "On"
( 59), "Off" cannot be selected.
Automatic Standby after OTR
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing "Automatic Stop" or
"Recording Time" (
Automatic Standby after Copy
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing copy. (
64
SQT0993
63) or "TV
24).
40)
RF OUT ( Aerial Signal )
Set whether to output the broadcasting signal
from RF OUT or not while in standby mode
(When "Quick Start" is not activated).
• If "On" is selected, the broadcasting signal
is output from this unit.
Networked Standby
This unit can be turn on using a wake-up
message sent from the network device in the
home network. (Available only when "Quick
Start" is set to "Off".)
• On:
- Power consumption increases when this
unit is in standby mode. (
- This unit can be used as a DLNA Server
when this unit is in standby mode. (This is
possible if you have ever connected your
client Panasonic recorder to the network
using this unit as a server.)
• Off:
- Power consumed when this unit is in
standby mode becomes smaller than that
consumed when "On" is selected. (
- When this unit is in standby mode, it
cannot be used as a DLNA Server.
• When you change the "On/Off" setting of this
function, the "On/Off" setting of "Home
Network function" also changes.
• If "Quick Start" and "Home Network function"
are set to "On", even when this unit is turned
off, it can be used as a DLNA Server.
• This function can be used with Panasonic recorders to
be released from September 2015 and beyond.
• This function may not work correctly depending on
network environment.
73)
73)