Magellan Trailblazer XL Reference Manual page 36

Next, key in the distance north or south from
the selected location, then press the RIGHT
ARROW to move the cursor to the hemi-
sphere. Use the UP/DOWN ARROW to dis-
play "N" or "S" and press ENTER.
Repeat to key in distance east or west of the
"from" location and select "E" or "W", then
press ENTER. The receiver computes and dis-
plays projected coordinates. To save the coor-
dinates as a landmark, press ENTER.
If you selected "TRIANGULATE" in Setup, you will select two "from" locations and
enter a bearing from each location to compute the estimated location coordinates.
Press the UP ARROW from the Location
screen. The receiver automatically displays the
current location (LOC). Use the RIGHT/LEFT
ARROW to select a different "from" location.
When the desired location is displayed, press
ENTER.
Next, key in bearing from the selected loca-
tion and press ENTER.
Select the second location and press ENTER,
then enter bearing from the second location,
and press ENTER again.
Using Your Magellan Receiver
27