Ford 2016 F-150 Owner's Manual page 368

Hide thumbs Also See for 2016 F-150:

Table of Contents

Use your key to remove the lock

cylinder from the access hole of the

bumper to allow access to the guide

tube. Assemble the jack handle as

shown in the illustration.

2. Fully insert the jack handle through the

bumper hole and into the guide tube

through the access hole in the rear

3. Turn the handle counterclockwise until

the tire is lowered to the ground, the

tire can be slid rearward and the cable

is slightly slack.

4. Remove the retainer from the center

of the wheel.

5. Block both the front and rear of the

wheel diagonally opposite the flat tire.

For example, if the left front tire is flat,

block the right rear wheel.

F-150 (TFC) Canada/United States of America, enUSA, Edition date: 08/2015, First Printing

Wheels and Tires

6. Obtain the spare tire and jack from

Jacking the Vehicle

Front Jacking Points

Note: Use the frame rail as the jacking

location point, not the control arm. The

frame rail is marked with an arrow.

their storage locations.

Loosen each wheel lug nut on the

affected flat tire one-half turn

counterclockwise, but do not remove

Troubleshooting