Switching To Normal Cruise Control - Ford 2016 F-150 Owner's Manual

The surface of the radar in the grille is dirty
or obstructed in some way.
The surface of the radar in the grille is clean
but the message remains in the display.
Heavy rain or snow is interfering with the
radar signals.
Swirling water, or snow or ice on the surface
of the road may interfere with the radar
signals.
You are in a desert or remote area with no
other vehicles and no roadside objects.
Due to the nature of radar technology, it is
possible to get a blockage warning and not
have a blockage. This can happen, for
example, when driving in sparse rural or
desert environments. A false blocked
condition either self clears or clears after
a key cycle.
Switching to Normal Cruise
Control
WARNING
Normal cruise control does not brake
due to slower vehicles. Always be
aware of which mode you have
selected and apply the brakes when
necessary.
You can manually change from adaptive
cruise control to normal cruise control
through the information display. See
General Information (page 108).
F-150 (TFC) Canada/United States of America, enUSA, Edition date: 08/2015, First Printing
Cruise Control
Cause
(If Equipped)
Clean the grille surface in front of the radar
or remove the object causing the obstruc-
tion.
Wait a short time. It may take several
minutes for the radar to detect that it is free
from obstruction.
Do not use the system in these conditions
because it may not detect any vehicles
ahead.
Do not use the system in these conditions
because it may not detect any vehicles
ahead.
Wait a short time or switch to normal cruise
control.
The cruise control indicator light
replaces the adaptive cruise
control indicator light if you
E71340
select normal cruise control. The gap
setting does not display, the system does
not automatically respond to lead vehicles
and automatic braking is not active. The
system recalls its last setting when you
start your vehicle.
227
Action