Removing The System Board; Prerequisites; Procedure - Dell Inspiron 3050 Service Manual

Removing the system board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You
must enter the Service Tag in the BIOS setup program after you replace
the system board.
NOTE: Replacing the system board removes any changes you have
made to the BIOS using the BIOS setup program. You must make the
desired changes again after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect them correctly
after you replace the system board.

Prerequisites

1 Remove the
2 Remove the
3 Remove the
4 Remove the
5 Remove the
6 Remove the
7 Remove the

Procedure

After performing all the steps in prerequisites, we are left with the system
board.
computer. After working inside your
base cover.
processor fan.
processor heat-sink.
memory module.
wireless card.
coin-cell battery.
solid-state drive.
After working inside your
49