Mitsubishi LVP-X400BU User Manual page 16

Menu operation (continued)
1 IMAGE
CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher
as the number increases.
BRIGHTNESS .... Adjusts image brightness. The image becomes brighter as
the number increases.
COLOR MATRIX. ...... Adjusts color balance in each color of the image. See page
18.
COLOR TEMP.. .. Adjusts color temperature. See page 18.
SHARPNESS ...... Adjusts the picture sharpness. The sharpness becomes
sharper as the number increases.
TINT .................... Adjusts the color balance in the image. The color balance
of the image shifts green as the number increases and
shifts to purple as the number decreases (displays only when the source is selected to
VIDEO).
• When the TV50 (PAL, SECAM) signal is inputted, you cannot adjust the TINT.
COLOR ................ Adjusts the color intensity of the image (displays only when the source is selected to VIDEO).
2 INSTALLATION
KEYSTONE ........ Adjusts keystone correction of the image. If the image has
keystone distortion, select the approximate setting.
AUTO POWER ON ..... To select whether to boot up automatically when the power is
turned on external to the projector. In this case, the main
power switch of the projector has to be ON. Set this when the
projector is hanging on the ceiling.
• The projector is in stand-by mode when the lamp is not
AUTO POWER OFF .. Use to select the length of time before projector switches to stand-by when there is no input
signal selected source.
SPLASH SCREEN . Use to display the splash screen on the screen when the power is turned ON.
IMAGE REVERSE Use to reverse or invert the projected image. MIRROR is used to rear projection. MIRROR,
INVERT is for rear projection ceiling mount.
3 FEATURE
MENU POSITION . Use to select the position where the menu is displayed,
(upper left) or
EXPAND MODE .. Selects the mode of enlarging screen. See page 21.
FRAME POSI. .... Sets the position of sub screen. See page 21.
VIDEO SIGNAL ... When AUTO is set, the appropriate video format is
automatically selected according to the input signal. If the
image does not appear correctly, select the desired video
format manually.
ANAMORPHIC ... Set ON when displaying DVD discs which are recorded in
letter boxed images.
LANGUAGE ....... Use to select the language for the projector display such as
menu. (
RESET ALL ........ Use to reset the MENU setting (except LANGUAGE).
• When the LANGUAGE in FEATURE menu is set to English and NTSC video format is selected, the bright-
ness is decreased 15 points by set-up cancel function for U.S. (The indicated value is not changed.) The image
becomes darker, but this is not a failure of the projector.
EN – 16
on. In this case, use the remote control to turn on the
lamp.
(lower right).
/ English / Español / Deutsch / Français / Italiano /
Opt
XGA60
IMAGE
CONTRAST
BRIGHTNESS
COLOR MATRIX USER
COLOR TEMP. STANDARD
SHARPNESS
TINT
COLOR
Opt
XGA60
INSTALLATION
KEYSTONE
AUTO POWER
OFF
ON
AUTO POWER
OFF
OFF
SPLASH SCREEN
ON
IMAGE REVERSE OFF
Opt
XGA60
FEATURE
MENU POSITION 1.
A
EXPAND MODE 1.
A
3.
A FRAME POSI.
A
?
VIDEO SIGNAL AUTO
ANAMORPHIC OFF
A
LANGUAGE English
Ë
RESET ALL OK
)
0
0
0
0
0
0˚
ON