Oki C910 Service Manual page 247

Display on the operator panel
Network Initializing
Network Configuration Writing
Density Adjusting
Waste Toner Transfer Error
Waste Toner Near Full
Check Waste Toner Box
Waste Toner Full
Centro I/F Error
Staple Jam
Check Punch Chip Box
File Accessing
File System Operation failed
<nnn>
File System is Full
File System is Write Protected
Checking File System
Print File List
Install Finisher
Check Finisher
Staple Jam
Check Finisher
Paper Jam
Check Finisher
Paper Remain
Print Font
Press ONLINE Button for
Restoration
Black Toner Not Installed
44043511TH Rev.2
Meaning
The network configuration is being
initialized.
The network configuration is being
saved.
The printer is adjusting density.
An error has occurred during transfer
of waste toner.
The life of a waste toner box is about
to end.
Since a waster toner box is not
installed correctly, it must be
reinstalled.
A waste toner box is full, so it must
be replaced with a new one.
A parallel I/F error has occurred.
A staple jam has occurred in the
stapler unit of the finisher.
The punch dust box is full or not
installed.
The printer is accessing a file in an
internal hard disk.
An error has occurred while the
printer was accessing a file in an
internal hard disk.
A hard disk (an option) or flash
memory has run out of free space.
Data is written to either a hard
disk (an option) or a flash memory
without authorization.
The file system is being checked.
A file list is being printed.
The finisher is disconnected from the
inverter. It is necessary to connect
the finisher to the inverter.
A staple jam has occurred in the
stapler unit of the finisher. It is
necessary to remove every jammed
staple.
A paper jam has occurred in or near
the finisher.
Paper is remaining in or near the
finisher.
A font list is being printed.
It is necessary to press the ONLINE
button to restore.
A black toner cartridge is not
installed in the printer, or an
unrecognized black toner cartridge is
installed.
Oki Data CONFIDENTIAL
Measures
Wait for a while.
Wait for a while.
Wait for a while.
Open the top cover and reinstall the
drum basket.
Prepare a new waste toner box but
not unnecessary to replace it now.
Reinstall a waste toner box.
Replace it with a new waste toner
box.
Press the ONLINE button.
Remove every jammed staple.
Empty the punch dust box or install it
correctly depending on the cause.
Wait for a while.
Normal printing is available. Contact
the customer support center if the
error remains.
Normal printing is available.
Normal printing is available.
Wait for a while.
Wait for a while.
Connect the finisher to the inverter.
Remove every jammed staple.
Disconnect the finisher and the
inverter and remove the jammed
paper.
Disconnect the finisher and the
inverter and remove the remaining
paper.
Wait for a while.
Press the ONLINE button.
Install a genuine black toner cartridge.
246 /