Job-Offset-Assy 723 And Basket-Assy - Oki C910 Service Manual

4.3.8 Job-Offset-Assy 723 and Basket-Assy

(1) Open the Cover Assy-Top.
(2) Unscrew screw
connector through the shaft)
(3) Remove the 2 hinges, then remove the Job-Offset-Assy
nector.
(4) Unscrew 2 screws
.
(5) Remove the six screws
Link-L. Remove the Plate-Top and the Basket Assy
(6) Remove the 2 hinges, then remove the Cover Assy-Top (Sub)
(7) Remove the Side Cover (L) Rear
(8) Remove the E-ring
Collar
(9) Unscrew 3 screws
(10) Unscrew 3 screws
(11) Remove the Waste toner Assy tube
44043511TH Rev.2
, remove Frame-Duct
, then remove the 2 hinges, and remove the Cover Assy-Top (Sub)
of the Guide-Link-R and the three screws
, unscrew 2 screws
, Shaft-Top (A) , Spring-Torsion-Top (L)
, then remove the Gear-Assy-L
, then remove Gear-Assy-R
, then remove the connector (remove the
, and disconnect the con-
with their interlock.
.
, then remove the Plate-Support (Top)
, Spring-Torsion-Top (B)
.
.
, then remove Basket-Assy
Oki Data CONFIDENTIAL
of the Guide-
.
,
.
.
117 /