Device Selection Menu - Mitsubishi WS-48511 Owner's Manual

Device Selection Menu

Device Section
When the Device Selection menu is displayed, the
Device or Input you are currently viewing shows a
gold-colored icon.
To select another device or input, use the ADJUST
or
button, to move the yellow highlight
among the devices. Press ENTer to select the
device you would like to view and hear. The TV
inputs are automatically changed. If NetCommand™
is setup, the inputs on compatible A/V Receivers
are automatically changed at the same time.
Power On/Off Devices
Some devices will power On automatically when you
select to use the device. These devices will power
Off automatically when you turn Off the TV. For
devices that do not power On or Off automatically
display the Device Selection menu, ADJUST
to highlight the device icon and press POWER
on the remote control. For the A/V Receiver, press
the AUDIO button to move the navigation to the
Audio Section. Highlight the A/V Receiver icon and
press POWER. If you press POWER on the remote
control when the Device Selection menu is not
displayed, the TV will turn Off.
Video Section
Device Section
Figure 1. Device Selection menu after NetCommand™ has been setup.
Audio Section
When a NetCommand™ compatible legacy IR
controlled A/V Receiver, or HAVi amplifier has been
connected to the TV and added to NetCommand™
Setup, an icon for this device will appear in the
audio section. Use the AUDIO button to change
navigation to the audio section. Then use the arrow
buttons to select the TV speakers icon or the A/V
Receiver icon. Press ENTer to change the audio
selection. Use the DEVICE button to return the
navigation to the Device Section.
Video Section
The TV icon is the destination for the currently
selected device. This is shown in the Video
Section.
or
Audio Section
39