Document Jam (Dcp-T700W) - Brother DCP-T300 Basic User's Manual

Hide thumbs Also See for DCP-T300:
Table of Contents

Advertisement

Document jam (DCP-T700W)

Documents can jam in the ADF unit if they are
not inserted or fed correctly, or if they are too
long. Follow these steps to clear a document
jam.
Document is jammed in the top of the
ADF unit
a
Take out any paper from the ADF that is
not jammed.
b
Open the ADF cover.
c
Remove the jammed document by
pulling it upward.
1
1 ADF cover
d
Close the ADF cover.
e
Press Stop/Exit.
IMPORTANT
To avoid document jams, close the ADF
cover correctly by pushing it gently in the
centre.
Document is jammed inside the ADF
unit
a
Take any paper that is not jammed out
of the ADF.
b
Lift the Document Cover.
46
c
Pull the jammed document out to the
B
left.
B
1 Document Cover
d
Close the document cover.
e
Press Stop/Exit.
Removing small documents jammed
in the ADF
a
Lift the Document Cover.
b
Insert a piece of stiff paper, such as
cardstock, into the ADF to push any
small paper scraps through.
1
B
1 Document Cover
c
Close the document cover.
d
Press Stop/Exit.
1
B

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcp-t700wDcp-t500w

Table of Contents