How To Scan A Document As A Pdf File Using The Control Panel (Windows ® And Macintosh) - Brother DCP-T300 Basic User's Manual

Chapter 6
How to scan a document as a PDF file using the
control panel (Windows
a
Load your document. (See How to load documents on page 20.)
b
Press (SCAN).
c
Press a or b to choose Scan to File.
Press OK.
d
If the machine is connected to a network
Press OK.
Do one of the following:
If you want to use the default settings, press a or b to choose Off.

Press OK.
Go to step g.
 If you want to change the default settings, go to step e.
e
Press a or b to choose On.
Press OK.
f
Choose the settings for Scan Type as required.
Press OK.
Repeat this step for the settings for Resolution, File Type, Scan Size and
Remove Bkg. Clr.
g
Press Mono Start or Colour Start.
The machine starts the scanning process.
NOTE
The following scan modes are available.
• Scan to File
• Scan to Image
• Scan to E-mail
1 2
• Web Service
1
(DCP-T500W and DCP-T700W)
2 ®
Windows users only. (Windows Vista
(See Software and Network User's Guide.)
32
®
and Macintosh)
1
, press a or b to select the PC Name.
® ®
SP2 or later, Windows 7 and Windows
®
8)
6