Netcommand® Menu; Transport Menu; Icon Order - Mitsubishi WD-52528 Owner's Manual

NetCommand® Menu
NetCommand Menu
Figure 11
Figure 11. NetCommand Menu
Edit
Detailed information regarding setting up and editing
the NetCommand system is found in Chapter 3. The Edit
NetCommand screens allow you to add new devices and
change traditional and IEEE 1394 devices. You can also
set up the TV Guide On Screen® system, or turn it on
or off. Turn devices and unused inputs On or Off, delete
a single device or delete the entire setup configuration.
If you choose to delete the entire configuration, or if
the NetCommand setup was cancelled, deleted or not
completed, you can start at the Initial NetCommand
screen. The Review screen shows all devices connected
to the TV.

Icon Order

Figure 12
The Icon Order screen allows you to arrange the device
icon order on the Device Selection menu to a different
sequence, for ease of selection and operation.
To change the order, press ADJUST ,
the icon to be moved and then press ENTER. Press
ADJUST , , , to move the icon to the desired
position and then press ENTER to set the icon in place.
Figure 12. Icon Order Menu

Transport Menu

Figure 13
Figure 13. Transport Menu
NetCommand can use the Transport menu to control
VCRs, DVDs, IEEE 1394 A/V Discs, digital VCRs, and
similar devices. If you choose to turn off this menu when
viewing these devices, the transport buttons (rewind, play
forward, stop, pause and record) on the TV's remote
control will continue to operate these devices. In the
Device Selection menu, selecting a VCR or DVD Player
will automatically display the Transport menu. You can
re-display this menu by pressing DEVICE MENU.
Select Transport menu functions by pressing ADJUST
,
playback, press ADJUST
press ENTER. If a function is not possible, such as record
for a DVD Player, the Transport menu button will be
grayed out.
To prevent display of the Transport menu, open the
NetCommand menu and set the transport menu option to
Off.
Remote Control Transport Buttons
Transport buttons (rewind,
play forward, stop, pause
, , to highlight
and record) on the remote
control are located in the
bottom section of the
remote control.
Main Picture
, , and then ENTER. For example, to pause
or
Chapter 5. TV Menu Screen Operations
to move to PAUSE, then
65