Care; Sleep Timer - Mitsubishi WD-52528 Owner's Manual

Remote Control Functions: Care and Sleep Timer

Sleep Timer

Setting the Sleep Timer:
1. Press SLEEP on the remote control.
2. Each press of SLEEP increases the time displayed by
30 minutes, until the maximum value of 120 minutes is
reached.
3. After 5 seconds of inactivity, the message will
disappear.
. Press SLEEP to view the remaining time before the
timer turns the TV off.
Canceling the Sleep Timer:
1. Press SLEEP to display the on-screen message.
2. Press SLEEP repeatedly until OFF is displayed.
Note: After 5 seconds of inactivity, the message
box disappears.
Hint: If the remote is in the TV layer and the TV will not
function, press POWER and 935 to reset the remote.

Care

For Best Results from the Remote Control:
• Be within 20 feet of the equipment.
• Do not press two or more buttons at the same
time unless instructed.
• Do not allow unit to get wet or become heated.
• Avoid dropping on hard surfaces.
• Do not use harsh chemicals to clean. Use only
a soft, lightly moistened cloth.
• Do not mix new and old batteries.
• Do not heat, take apart or throw batteries into
fire.
• Use only alkaline batteries.
1
Chapter 1. Television Overview