Advertisement
Connection
ofTV
toVCR
and Cable Box
I. Connect the incoming cable toANT-A
on the TV back panel.
2. Connect three coaxial cables as follows:
• One from CABLE LOOP-OUT
on the
TV back panel to IN on the back of the
cable box.
• One from OUT on the back of the
cable box to ANTENNA
IN on the
VCR back panel.
• One from ANTENNA
OUT on the
VCR back panel to ANT-B on the TV
back panel.
TV Back pan_
©
®
....
®®
ANT_ L_OUT
ANT,B
®®
©
VCR Back panel
If your VCR has a video chant=el
ON/OFF sw_tch_ set it to OFF,
Audio Video Connections
I. Connect a video cable fromVIDEO
OUT on theVCR back panel toVIDEO
INPUT I or INPUT 2 on theTV back
panel.
If you have a S-VHSVCR, follow the
same steps, using the S-Video terminals
on the VCR and TV.
2. Connect a set of audio cables from
AUDIO
OUT on theVCR back panel
to AUDIO
INPUT on the TV back
panel. The red cable connects to the R
(right) channel and the white cable
connects to the L (left). If yourVCR
is
non-stereo, connect only the L (left)
cable.
TV _ck
P_e_
RCA
cab_
VCR _ck
pa_el
If your VCR has a video channel
ON/OFF s_wltch, set it to OFF,
_
F_CA pin-ly
video caSe_
A_tac_
only
cat_e
type
type
cable
10
Advertisement
