Advertisement
Input Source Selection
INPUT
If you want to view a picture from your DVD, VCR, camcorder or
laser disc player, you need to select the input the product is con-
nected to.
Use the input button on the front panel or the remote
control INPUT button.
After selection, the input name will display briefly in the upper left
corner of the screen.
Your input source can be:
• ANTA
orANT
B - for antenna or cable systems signals.
• INPUT I or INPUT 2 - for audio video product connected to the
TV back panel terminals.
• INPUT 3 - for audio video product connected to theTV front
panel terminals.
• DVD - for component
(Y, Cr, Cb) DVD players.
Changing
Channels
Numbers*
enter the number,
the channel will
change in 4 seconds
SQV (SuperQuickView
TM)
/
press to see SQV memorized _
channels, in order
_E
_P
QV (QuickView _)
press QVto see the last
channelselected
Channel
press the channel button to
view channels in order
*When
changing channels directly, you can change them faster by:
I. entering three numbers;for
channel 2,press 002
OR
ENTE_
2. press number and ENTER; for channel 2, press 2 then _.
31
Advertisement
