Programming The Remote Control: To Activate The System 4 Home Theater Ir Control - Mitsubishi VS-45609 Owner's Manual

Programming the Remote Control:
To Activate the System 4 Home Theater IR Control
Models VS-60719 and VS-70709
Testing System 4 for Proper Setup
Move the slide switch to the position you
1
wish to test.
Point the remote at the TV.
2
Press and release the HOME THEATER
3
button. If the audio portion has been
properly setup, your A/V receiver will
have changed to the appropriate input
as indicated in table 1, page 15. If the
video connection of your System 4 has
been properly setup, your TV will have
changed to the appropriate input.
AUDIO
If the A/V Receiver did not change
inputs...
Repeat Special Setups, page 15, and retest.
1
Reposition IR emitter(s) and retest
2
Repeat To Activate the Audio Portion, page
3
26, and retest.
If your A/V receiver is still not responding
to the commands from your remote control,
you may have an incompatible A/V receiver.
Proceed to Deactivating the System 4 Home
Theater IR Control, on this page.
System 4 is designed for use with A/V receiv-
ers that have at least 4 inputs. A/V receivers
with fewer may be only partially compatible.
AUDIO
If the A/V Receiver changed to
an input other than the one indicated in
table 1, page 15...
Connect the audio output from your A/V
1
device to the A/V receiver input that your A/V
receiver DID change to, and retest.
VIDEO
If the TV did not change inputs...
1
Repeat To Activate the Video Portion, page
26, and retest.
Deactivating the System 4 Home
Theater IR Control
Simultaneously press the CANCEL
1
button and the HOME THEATER button.
Part III: Setup
27
27