Inputs Menu - Mitsubishi WD-57833 Owner's Manual

Inputs Menu

Note:
When you change an input name in the Name menu
and then exit the Name menu:
The name is changed
The icon in the Input Selection menu is changed
Audio and video settings are changed to the
defaults for the new device type.
All NetCommand "learning" for the input is also
erased.
Inputs Menu Options
Cable Box,
Camcorder,
Name
DVD, DVD2,
DVR, Game, HD
Disc, Satellite,
VCR, PC
On/Off (ANT 1
and 2 only)
Off (HDMI only)
Put frequently used icons at the start of the Input Selection menu.
1. Press to highlight the icon to move.
Order
2. Press ENTER to confirm the selection.
3. Press to drag the icon to the desired position.
4. Press ENTER to set the new position.
• Perform initial set-up of NetCommand control of a device.
• Add or remove individual keys from NetCommand control of a device.
Learn
See detailed instructions in chapter 6, "NetCommand."
Set up NetCommand control of an A/V receiver. This set-up allows you to:
• Operate the A/V receiver's power and volume functions with the TV's remote control.
AVR
• Make the A/V receiver switch automatically to the correct audio input when you select a
See detailed instructions in chapter 6, "NetCommand."
Guide
Guide
Devices
Zip Code
• Assign or change names of inputs appearing in the Input Selection
menu.
• Turn Ant-1 and Ant-2 On or Off.
• Turn unused HDMI inputs Off.
• Press to move between inputs.
• Press to select a name.
• If you change the name of an input after performing NetCommand
"learning," the IR codes you "learned" are erased.
Note: When you disconnect an HDMI device, the icon remains in the
Input Selection menu until you remove it. To remove an unwanted HDMI
icon, select Off for the HDMI input.
device in the TV's Input Selection menu.
On/Off
Ant-1, Ant-2
[5-digit ZIP code]
5. TV Menu Settings
Change input names using the Inputs > Name menu.
See instructions on the following page for the TV Guide
On Screen system.
49