Table of Contents
Advertisement
50
5. TV Menus
Inputs Menu
Inputs Menu Options
Cable Box, Camcorder, CD/
Audio, DVD (DVD, DVD2,
Name
Blu-Ray), DVR, Game (Game,
PS, Xbox, Wii), MP3 Player, PC,
Satellite, VCR, AVR
On/Off (ANT 1 and ANT 2 only)
Delete (deactivated HDMI only)
Control On, Control Off (CEC-
enabled HDMI devices; operates
only when Inputs > NetCommand
HDMI Control is set to On)
General Notes
When you change an input name in the Name menu and then exit the Name menu:
•
The name is changed
•
The icon in the
Input Selection menu is changed
•
Audio and video settings are changed to the defaults for the new device type.
•
All previous NetCommand "learning" for the input is erased.
Notes for HDMI devices
•
Disconnecting an HDMI device:
menu until you remove it. Select Delete in the Inputs > Name menu to remove an unwanted icon for an HDMI input.
NetC
ommand for HDMI and CEC-Enabled Devices: If CEC conflicts occur, turn off CEC signals in one of
•
these ways: a) Turn off all NetCommand for HDMI signals from the TV (Inputs > NetCommand HDMI Control
menu), b) Turn off NetCommand HDMI signals for specific devices (Inputs > Name menu), or c) Turn off each
device's internal CEC capability. See Appendix E for the TV's NetCommand for HDMI Control or, to turn on/off
a specific device's response to CEC signals, see the device's owner's manual.
Names of CEC-enabled devices: CEC-enabled devices send their own predefined name to the TV. You
•
cannot change the name of a CEC-enabled device; applies only when Inputs > NetCommand HDMI Control
is set to On.
Lets you put frequently used icons at the start of the Input Selection menu.
1.
Order
2.
3.
4.
Sets up or changes NetCommand IR control of the current viewing device.
Learn
See detailed instructions in chapter 6, "NetCommand IR Control."
Sets up NetCommand IR control of an A/V receiver.
AVR
See detailed instructions in chapter 6, "NetCommand IR Control," starting on page 60.
Guide, Devices, Zip
Code
Guide
On, Off
NetCommand
HDMI Control
When you disconnect an HDMI device, the icon remains in the Input Selection
Press
to highlight the icon to move.
Press
ENTER to confirm the selection.
Press
to drag the icon to the desired position.
Press
ENTER to set the new position.
246 Series TV. See Appendix D for the TV Guide Daily system.
Select On or Off to enable or disable the TV's control of all CEC-enabled
devices. See Appendix E for details.
To turn CEC on or off for individual devices, use the Inputs > Name
menu.
•
Lets you assign or change names of inputs appearing in the
Input Selection menu.
-
Press
to move between inputs.
-
Press
to select a name.
Ant-1 and Ant-2 On/Off (to display/hide in Input
•
Lets you turn
Selection menu).
•
Lets you delete unused HDMI inputs from the
menu.
•
If you change the name of an input after performing NetCom-
mand "learning," the IR codes you "learned" are erased.
Input Selection
Advertisement
Table of Contents
