20
3. TV Connections
DVD Player with Component Video
Component video cables and analog audio cables are
required.
1. Connect the component video cables from Y Pb Pr
VIDEO OUT on the back of the DVD player to the
COMPONENT jacks on the TV back panel, match-
ing the green, blue, and red colored connections.
2. Connect left (white) and right (red) stereo audio
cables from AUDIO OUT on the back of the DVD
player to COMPONENT AUDIO L (MONO) and
AUDIO R on the TV back panel.
3D GLASSES
EMITTER
IEEE 1394
RS-232C
Figure 7. Connecting a DVD player with component
IR EMITTER
NetCommand
video
Note: To hear digital surround sound from your DVD
player, connect the digital audio output from the
DVD player directly to your digital A/V receiver.
IMPORTANT
See Appendix A for component video signal
compatibility information.
For digital audio connections to your A/V
receiver, see your DVD player and A/V receiver
Owner's Guides.
Y Pb Pr (480i/480p/720p/1080i)
Y
Pb
Pr
L (MONO)- AUDIO - R
COMPONENT 1
COMPONENT 1
COMPONENT 2
AUDIO-
LEFT
RECORD
OUTPUT
AUDIO-
ANT 2 /
AUX
VIDEO
RIGHT
INPUT 1
ANT 1 /
INPUT 2
MAIN
S-VIDEO
VIDEO
L (MONO)
- AUDIO - R
HDMI
1
, 2
,
3
(LEFT)
(MIDDLE)
(RIGHT)
VIDEO: 480i / 480p / 720p /
1080i / 1080p
AUDIO: LINEAR PCM
PC: VGA, W-VGA, SVGA,
W-SVGA, XGA, W-XGA,
SXGA / 720p / 1080p
DVI Video Device (Cable Box, Satellite
Receiver, DVD Player, or Other Device)
Connect DVI devices (digital only) to the TV's HDMI
input jacks.
Analog stereo audio cables and a DVI-to-HDMI cable or
DVI/HDMI adapter and HDMI cable are required.
1. Connect the DVI-to-HDMI cable (recommended) or
HDMI cable with DVI/HDMI adapter from the DVI
device's back panel to the TV's HDMI jack.
Note: If you are using a DVI/HDMI adapter, it is impor-
tant to connect the adapter to the DVI device for
best performance.
2. Connect a set of audio cables from AUDIO OUT
on the DVI device back panel to the DVI/PC AUDIO
INPUT on the TV back panel. Connect the red
cable to the R jack and the white cable to the L
(MONO) jack.
Note: The HDMI connection supports copy protection
(HDCP).
Some devices require connecting to an analog
input first, in order to view on-screen menus
and to select DVI as the ouput. Please review
your equipment instructions for DVI connectivity
and compatibility.
3D GLASSES
EMITTER
DVI / PC
AUDIO
INPUT
AVR
AUDIO
OUTPUT
DIGITAL
AUDIO
OUTPUT
RS-232C
IR EMITTER
NetCommand
Figure 8. Connecting a digital DVI device
Y Pb Pr (480i/480p/720p/1080i)
Y
Pb
Pr
COMPONENT 1
COMPONENT 2
AUDIO-
LEFT
RECORD
OUTPUT
AUDIO-
VIDEO
RIGHT
INPUT 1
INPUT 2
IEEE 1394
S-VIDEO
VIDEO
HDMI
1
, 2
,
3
(LEFT)
(MIDDLE)
(RIGHT)
VIDEO: 480i / 480p / 720p /
1080i / 1080p
AUDIO: LINEAR PCM
PC: VGA, W-VGA, SVGA,
W-SVGA, XGA, W-XGA,
SXGA / 720p / 1080p
L (MONO)- AUDIO - R
DVI / PC
DVI / PC
AUDIO
AUDIO
INPUT
INPUT
AVR
AUDIO
OUTPUT
L (MONO)
- AUDIO - R