Remote Control Functions Care And Operation; Use Of The Remote Control With Other A/V Products - Mitsubishi PD-4225S Owner's Manual

Remote Control Functions: Care and Operation
Remote Control Functions: Care and Operation
- When using the remote control, aim it at the remote control sensor on the TV.
- Under certain conditions such as if the remote IR signal is interrupted, the remote control may not function. Press the key again
as necessary.
Operation
Operation
Installing the Batteries:
(Figure 2)
1. Remove the remote control's back cover by gently pressing the
ridged tab in the direction of the arrow and sliding off the cover.
2. Load the batteries, making sure the polarities (+) and (-) are cor-
rect. For ease of installation, install the negative (-) side first.
For Best Results from the Remote Control:
• Be within 20 feet of the equipment.
• Do not press two or more buttons at the same time unless
instructed to.
• Do not allow to get wet or become heated.
• Avoid dropping on hard surfaces.
• Do not use harsh chemicals to clean. Use only a soft, lightly
moistened cloth.
• Do not mix new and old batteries.
• Do not heat, take apart, or throw batteries into fire.
• Use only AA batteries.
Operating the Remote Control:
Operating the Remote Control:
You can use the remote to control the TV, CABLE/DBS/DTV, VCR,
DVD, and AUDIO products. Select the product you want to control
by moving the slide switch to the appropriate position. The remote
control has been preset to operate the TV and other Mitsubishi prod-
ucts. To program the remote control to operate other products, see
Use of the Remote Control with Other A/V Products, page 20.
Installing Batteries
Installing Batteries
Figure 2. Installing the batteries.
18 Plasma TV
size AA
batteries
CABLE/DBS/DTV VCR DVD
AUDIO
TV
2 3
1
4 5 6
7 8 9
0
SQV QV
DEVICE CH VOL
TV MENU
DEVICE
MENU
SLEEP
INFO AUDIO
PIP CH PIP
EXCH
PIP DEVICE FORMAT
REC
PAUSE
PLAY
REW/REV
STOP
Figure 1. Remote Control Functions.
IMPORTANT
The remote control may return to its initial setting
when the batteries are changed. You may need to
reprogram.
POWER
MTS
GUIDE
MUTE
HOME
CANCEL
VIDEO
ZOOM+
ZOOM–
FF/FWD