Connection Options - Back Panel - Mitsubishi PD-4225S Owner's Manual

Mitsubishi plasma tv pd-4225s owner's guide
Table of Contents

Advertisement

Connection Options
Connection Options
5
6
1. ANTENNA INPUT PORT
Connection for an over-the-air or terrestrial antenna, a
cable TV wire, or cable box.
2. VIDEO (REAR) INPUT
Connection for audio/video out from external equipment.
3. AV OUTPUT
Connection for a second TV or monitor (ONLY). DO NOT
CONNECT ANY OTHER INPUT SOURCES.
4. TO DISPLAY (Factory Connected)
Connect the TV to the Tuner with the tuner box cable.
5. EXTERNAL SPEAKER (8 ohm output)
Connect to optional external speaker(s).
6. MONITORLINK CONTROL (CONTROL/SERVICE) PORT
A digital control interface that works in conjunction with
MonitorLink. While MonitorLink provides the digital video sig-
nal, MonitorLink Control provides enhanced functioning such
as automatic power on/off and input selection. If you are not
connecting a Mitsubishi HDTV Receiver/Controller with
MonitorLink features, MonitorLink Control can be used as a
RS-232C control signal input port.
Back Connection Panel
Back Connection Panel
1
7
8
2
3
4
9
7. MONITORLINK/DVI
MonitorLink when used with MonitorLink Control is a
Mitsubishi exclusive digital interface for the display of high
quality digital video signals from a Mitsubishi HD
Receiver/Controller, such as the HD-5000. The MonitorLink
input can also be used as a DVI input from other sources.
NOTE: When MonitorLink is used as a DVI-HD input, the ter-
minal is compliant with EIA-861 standards for extended and
high definition video; however, this input is not intended for
use with personal computers or devices generating video
signals with computer resolutions.
RGB INPUT/AUDIO INPUT JACKS
Connect the PC or DTV to the appropriate input port.
8. TO TUNER (Factory Connected)
Connect the plasma TV to the Tuner with the tuner box
cable supplied.
9. COMPONENT INPUT/AUDIO INPUT JACKS
Connect a component video device to these jacks.
10. POWER CORD SOCKET
This TV operates on an AC power. The voltage is indicated
on the Specifications page. Never attempt to operate the
TV on DC power.
10
Owner's Manual 17

Advertisement

Table of Contents
loading

Table of Contents