Downloading Errors - Kyocera FS-1920 Service Manual

(4) Downloading errors

The following messages are indicated on the message display when an error occurred during downloading the firmware
data.
Error message
download header
error [##]
##: Error code 20 to 26.
system download
error [##]
##: Error code 40 to 59.
receive
error [##]
##: Error code 80 or 81.
Engine download
error [##]
##: Error code 60 or 69.
Message download
error [##]
##: Error code 70 or 77.
If the corrective action above does not solve the problem, replace engine board (KP-1081). See page 1-6-20.
Description
Deficit of the file header
Deficit of the data header
File checksum error
Data checksum error
File header version error
Data header version error
Incompatibility of firmware and
system DIMM board
Defective system DIMM board
Improper connection of parallel
cable between PC and printer
Defective parallel cable
Improper connection of parallel
cable between PC and printer
Incompatibility of firmware and en-
gine board
Improper connection of parallel
cable between PC and printer
Defective LCD controller board
Corrective action
Obtain the correct firmware.
Confirm whether the firmware is applicable to
this printer.
Replace the system DIMM board.
Check the contact between PC and the printer's
interface connector.
Replace the parallel cable.
Check the contact between PC and the printer's
interface connector.
Confirm whether the firmware conforms to this
printer.
Check the contact between PC and the printer's
interface connector.
Replace the LCD controller board
2FP/2FY/2FR
1-7-7