Carrier THERMIDISTAT CONTROL Homeowner's Manual page 3

FAN Button choos-
es ON or AUTO fan
operation.
SET DHUM Button
allows you to
change dehumidifi-
cation set point.
SET COOL Button
allows you to enter
your desired cool-
ing set point.
SET HEAT Button
allows you to enter
your desired heat-
ing set point.
SET HUM Button
allows you to
change humidifi-
cation set point.
VACATION Button
SET TIME Button
temperature and humidity set
allows you to enter
points to lower levels for opti-
the time of day.
mum energy efficiency while
you're away.
NOTE: Not all messages displayed in the above illustration will appear at once in any situation.
MODE Button selects OFF, HEAT,
COOL, or AUTO operation. EMER-
GENCY HEAT (EHEAT) mode is also
included when the Thermidistat
Control is installed with a heat pump.
changes RESET FILTER Function
the timer that determines the next
air filter change or cleaning.
Activated by pressing VACATION
and END buttons simultaneously.
Room Tempera- *Outdoor
ture Display Temperature
shows current Display shows the
room temperature. outdoor temperature.
restarts END Button
pletes the tempera-
ture and humidity
set-up sequence.
Temperature
Settings Display
shows the temper-
ature settings for
current time period.
Time of Day
Display exhibits
the time of day.
Clean Filter
Indicator lets you
know it is time to
clean or replace your
system's air filter.
*Auxiliary Heat
Indicator
played when a heat
pump system's aux-
iliary heat is on.
com- Up and Down Buttons
the temperature and humidity set
points. They are also used to
access outdoor temperature and
indoor humidity levels.
•Available on selected models.
is dis-
change