Grizzly G0690 Owner's Manual page 61

T10222—Router Table Attachment
T10223—Sliding Table Attachment
Accessorize your G0690 or G0691 Cabinet Table
Saw with either of these attachments for the ulti-
mate in table saw functionality.
T10223
Figure 94. T10222-23 Sliding Table & Router
Table Attachments.
Forrest Woodworker II Saw Blades
T20778—10", 20 Teeth
T20779—10", 40 Teeth
T23527—10", 48 Teeth
Hailed as the Cadillac of all blades, Forrest saw
blades have become legendary for their ability to
leave highly polished, finish-ready surfaces on
nearly everything they cut. Made in the USA.
With this all-purpose blade for table saws you can
rip and crosscut 1" 2" rockhards and softwoods,
resulting in a smooth-as-sanded surface. With
20° face hook, ply veneers will crosscut with no
bottom splinter at moderate feed rates. Double
hard and 40% stronger C4 carbide will give up
to 300% longer life between sharpenings. Ends
blade changing (one blade does rip, combo and
crosscut), second-step finishing and cutting
oversize to allow for resurfacing. Buy and sharpen
one blade instead of 3 (24T rip, 50T combination
and 80T crosscut). ⁄ " arbor,
5
8
Figure 95. Forrest Woodworker II Saw Blade.
order online at
Model G0690/G0691 (Mfd. 6/15+)
T10222
⁄ "
1
16
⁄ " kerf.
1
8
www.grizzly.com
Forrest Dado Blades
H4756—8" x ⁄ " 24T Dado Blade Set
5
8
T23267—8" x ⁄ " 24T 3 Pc. Set
5
8
The world's finest dado blades cleancut all your
grooves! No splintering when cross-cutting
oak, ply veneers and melamine. Perfect for
flat-bottomed grooves. No staggered steps or
round bottoms like a wobble-dado leaves! Cuts
in all directions—rip, cross-cut, miter, any depth.
Super-hard carbide gives up to 300% longer life,
especially good on plywoods and abrasive parti-
cle-boards. ⁄ " arbor.
5
8
Figure 96. Forrest dado blades.
G0710—1HP Wall-Mount Dust Collector
G0710P—1HP Wall-Mount Dust Collector
G1163P—1HP Floor Model Dust Collector
G3591—30-Micron Replacement Bag
H4340—3.0-Micron Upgrade Bag
Excellent point-of-use dust collectors that can
be used next to the machine with only a small
amount of ducting. Specifications: 537 CFM, 7.2"
static pressure, 2 cubic foot bag, and 30 micron
filter. Motor is 1HP, 120V/240V, 7A/3.5A.
Model G0710
Model G1163P
Figure 97. Point-of-use dust collectors.
1-800-523-4777
or call
-59-