Sym DD 50 Service Manual page 136

This chapter Contents
14. REAR WHEEL/SUSPENSION
Rear Wheel
Connection nuts
Remove
Remove exhaust pipe nut. (2 connection nuts)
Remove exhaust muffler bolt (2 bolts), then
remove the muffler.
Bolts
Remove rear wheel shaft nut and then remove
the rear wheel.
Shaft nut
Inspection
As the diagram shown, measure wheel rim
wobbling with a dial gauge.
Service limit:
Radial: 2.0 mm (0.08 in)
Axial: 2.0 mm (0.08 in)
Hub nut
Brake Hub Replacement
Remove 4 nuts of cover and wheel rim, and then
remove the wheel hub.
Install the wheel hub and tighten the nuts.
Tighten torque: 2.5kgf-m
14-3