Sym DD 50 Service Manual page 121

12. BODY COVER
Steering Handle Cover
1. Removal:
Remove 1 screw under front light.
Remove 3 screws from the handle rear
cover.
Remove handle front cover.
Remove 2 inner screws.
Disconnect each switch connectors.
Remove speedometer cable.
Remove rear handlebar guard.
Remove handle rear cover and meter.
2. Installation:
Install in reverse order of removal
procedures.
Caution
Push the front connection part of rear handle
cover at first when removing front cover so that
the buckles are out of the cover. Never push
it forcefully to cause buckles broken or cover
damaged.
12-12
This chapter Contents
Screw
Screws
3 Screws
2 Screws