Table of Contents
Advertisement
34
Chapter 3. TV Operation
Remote Control
Overview
Figure 1, next page
1. Slide Switch: Selects the A/V device to be controlled
by the remote control. Set the slide switch to TV for
operation of the TV and IEEE 1394 devices. Control of
other device types requires programing (see chapter 3,
"TV Operation").
2. SLEEP: Sets the TV to turn off within 2 hours. See the
next page for instructions.
3. Digits/Letters: Allow you to tune to a channel by
entering channel numbers; press ENTER for faster
tuning. Use numbers and the CANCEL key to enter digital
sub-channels. Also use for entering information into
menus.
To select letters when naming channels, repeatedly
press the associated number key. The following
special characters are available with the 1 and 0 keys:
1
0
4. —/CANCEL (SUB-CHANNEL/CANCEL): When entering digital
channel numbers, adds a separator between main
and sub-channel numbers. Clears FAV and some
menu entries.
5. POWER: Turns TV power on and off.
6. QV (QuickView™): Switches between the current
channel and the last channel viewed.
7. MUTE: Turns TV sound off or on.
8. SPLIT: Turns Split Screen mode on and off.
9. VOL
(Volume Up/Down): Changes sound level.
/
10. CH/PAGE
/
(Channel or Page Up/Down): Scans
up or down through memorized channels. Pages
up and down through screens when used with
ChannelView™.
11 FAV (Favorites): Scans through memorized lists of
favorite channels. See "Channel Menu" in chapter 4,
"TV Menu Settings," for more information.
12. FORMAT: Changes the shape and size of the main TV
picture. When in Split Screen mode, changes the
Note: The TV's remote control can operate other
audio/video devices.
• See chapter 5, "Operating Other Devices with the
Remote Control" for:
instructions on programming the remote.
a list of functions available for controlling other
devices.
• For control of IEEE 1394 devices, see chapter 7.
! & blank space
/
*
-
size of the split images while maintaining their aspect
ratios.
13. INPUT: Displays the Input Selection menu from which
you can select an input source to view, such as an
antenna input (ANT 1/2) or a connected device.
14.
(Adjust Up/down/Left/Right): Navigate
menus and change settings.
15. ENTER: Selects a channel number or menu item.
16. GUIDE: Displays or removes ChannelView™ on-screen
channel listing for ANT 1 and ANT 2.
17. INFO: Displays an on-screen summary of the current
device in use and any broadcast information available,
including current V-Chip information. See chapter 3,
"TV Operation," for details.
18. AUDIO: Selects individual audio settings for adjustment.
19. VIDEO: Selects individual video settings for adjustment.
20. MENU: Displays the main TV menu using the
on-screen menu system. When a sub-menu is open,
backs up one level.
21. EXIT: Closes all TV on-screen menus and displays and
returns to normal TV viewing.
22. F1–F4: When programmed, work like the A, B, C, D
buttons on some cable boxes and satellite receiv-
ers. Program the remote control for your equipment
and test the keys. See chapter 5, "Operating Other
Devices with the Remote Control."
24.
(PAUSE): Freezes a broadcast TV picture when no
Split Screen image is displayed. When Split Screen is
displayed, freezes the sub-picture. See below for use
with recordable media.
Record/Playback Keys
To enable the recording and playback functions, program
the remote for your VCR, DVR, or DVD player/recorder and
set the slide switch to VCR or DVD. See chapter 5 for instruc-
tions on programming the remote. If you have an IEEE
1394 device, see chapter 7 on IEEE 1394 devices.
23.
(RECORD): Records with a VCR, DVR, or DVD
recorder.
24.
(PAUSE): Pauses a VCR, DVR, or DVD. See above
for use during TV viewing.
25.
(STOP): Stops play of a VCR, DVR, or DVD.
26.
(REVERSE): Rewinds a VCR. Reverse scans a DVR
or DVD.
27.
(PLAY): Plays a VCR, DVR, or DVD.
28.
(FAST FORWARD): Fast forwards a VCR. Forward
scans a DVR or DVD.
Hide quick links:
Advertisement
Table of Contents
