TV Front Panel
1
2
3
4
Control Panel
The shaded buttons on the front control panel duplicate
keys on the remote control. The upper labels show control
functions when no TV menus are displayed; the lower
labels indicate functions when TV menus are displayed or
when a special function has been activated. See "Remote
Control Overview" in chapter 3, "TV Operation," for further
details on the functions of these buttons.
System Reset Button
If the TV does not respond to the
remote control, front panel controls,
or will not power on/off, press the
SYSTEM RESET button on the front panel
with a pointed object, such as the point
of a pencil or end tip of a paperclip.
The green LED will flash quickly for
about one minute. When the green LED stops flashing,
you may turn on the TV.
A/V Reset
If you wish to reset the A/V (Audio/Video) settings back to
the factory defaults:
• To reset all settings at once, press GUIDE and FORMAT on
the front panel at the same time.
• To reset the defaults for individual devices, use the
A/V Memory Reset selection on the Audio/Video
menu.
Input 3
INPUT 3 provides an easily accessible set of standard
audio/video jacks. These jacks allow for convenient con-
nection of a camcorder or other audio/video device. Note
that if you connect to the S-VIDEO jack, the VIDEO jack
is deactivated.
INPUT 3 and controls on front panel of WD-57731 and WD-65731
5
1
Chapter 1. Television Overview
Above and Below:
1. Shaded buttons are duplicates of keys on the
remote control
2. POWER/TIMER indicator—lit during normal
operation; flashing when auto-on TV Timer is set
3. LAMP indicator shows lamp condition (usually off
during normal TV operation)
4. STATUS indicator (off during normal TV opera-
tion)
5. SYSTEM RESET (see description this page)
Models WD-57731
and WD-65731
3
Model WD-52631
Model WD-52631
Lift cover to use
the control panel
and INPUT 3 front
A/V jacks.
4
2
1
1
5
15