Dvd Player With Component Video; A/V Receiver (Stereo System) - Mitsubishi Electric WD-52631 Owner's Manual

High-definition television
Hide thumbs Also See for WD-52631:
Table of Contents

Advertisement

DVD Player with Component Video

Component video cables and analog audio cables are
required. These are not included with the TV.
1. Connect the component video cables from Y PB
PR VIDEO OUT on the back of the DVD player to
the COMPONENT jacks on the TV back panel,
matching the red, green, and blue colored connec-
tions.
2. Connect left (white) and right (red) stereo audio
cables from AUDIO OUT on the back of the DVD
player to COMPONENT/AUDIO LEFT and
RIGHT on the TV back panel.
Figure 13. Connecting a DVD player with component
video
IMPORTANT
See Appendix B for component video signal
compatibility information.
For digital audio connections to your A/V
receiver, see your DVD player and A/V
receiver Owner's Guides.
Chapter 2. TV Connections

A/V Receiver (Stereo System)

Most setups require either a digital audio cable or analog
stereo audio cables.
The TV makes all audio available in digital and analog
formats. Analog audio coming into the TV is available
in digital format on the DIGITAL AUDIO OUT jack.
Digital incoming audio is available in analog format on the
AUDIO OUT LEFT/RIGHT jacks. Usually, only one of
the following connections is required:
To connect an analog A/V receiver
Connect left (white) and right (red) audio cables from
AUDIO OUT/LEFT and RIGHT on the TV back
panel to the TV AUDIO INPUT on the A/V receiver.
To connect a digital A/V receiver with Dolby
Digital surround sound and PCM audio support
Connect one end of the digital audio cable to
DIGITAL AUDIO OUT on the back of the TV.
Connect the other end to the COAXIAL DIGITAL
INPUT on the back of the A/V receiver.
Figure 14. Connecting audio from the TV to an A/V
receiver
Note:
On rare occasions, an HDMI signal may be
copy-restricted and cannot be output from the TV
as a digital signal. To hear these copy-protected
signals through the A/V receiver, use connections
for analog A/V receivers.
Check the A/V receiver's Owner's Guide for
information concerning use of the digital input
and switching between digital sound and analog
stereo sound from the TV.
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd-57731Wd-65731Dlp wd-52631Dlp wd-57731Dlp wd-65731

Table of Contents