Connection - Panasonic DMR-EX97C Operating Instructions Manual

Getting started

Connection

3D programmes can be played back when this unit is connected to 3D compatible terminal of a
3D compatible TV.
• Before connection, turn off all equipment and read the appropriate operating instructions.
• Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic's HDMI cable.
When outputting 24p signal, please use HDMI cables 5.0 meters or less.
• When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of
power, even when the unit is in standby mode. (
[EX97C] Basic connections
RF coaxial cable
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
Household mains socket
(AC 220 to 240 V, 50 Hz)
• Keep the RF coaxial cables as far away as possible from other cables.
16
SQT0989
To the CATV terminal or the aerial
CATV coaxial cable or aerial cable
(supplied)
87)
HDMI cable
VHF/UHF
HDMI
RF IN
This unit's rear panel
TV