Menu Screens; Locking Controls And Settings - Shure ULX-D User Manual

Menu Screens

Receiver Channel
① Receiver Information
Use >
DEVICE UTILITIES HOME INFO
② Gain Setting
-18 to +42 dB, or Mute.
③ Mic. Offset Indicator
Indicates offset gain is added to the transmitter.
④ Transmitter Settings
The following information cycles when a transmitter is tuned to the
receiver's frequency:
• Transmitter Type
• Input Pad (Bodypack only)
• RF Power Level
• Transmitter Lock Status
⑤ Battery Runtime Indicator
Shure SB900 battery: runtime is displayed in minutes remaining.
Transmitter
6dB
① Transmitter Information
Scroll ▲▼ at the home screen to change the display.
② Power Lock Indicator
Indicates power switch is disabled.
③ Battery Runtime Indicator
Shure SB900 battery: runtime is displayed in minutes remaining.
AA Batteries: runtime is displayed with a 5-bar indicator.

Locking Controls and Settings

Use the feature to prevent accidental or unauthorized changes to the hardware.
LOCK
Receiver
Menu path: >
DEVICE UTILITIES LOCK
Use the control wheel to select and lock any of the following receiver
functions.
• : All menu paths are inaccessible
MENU
• : Gain adjustment is locked
GAIN
• : Power switch is disabled
POWER
• : Cannot perform a Scan and Sync
SCN/SYC
Tip: To unlock, press the button, turn the control wheel to select
EXIT
, and then press
UNLOCKED ENTER
to change the home screen display.
to save.
⑥ TV Channel
Displays the TV channel that contains the tuned frequency.
⑦ High Density Mode Icon
Displayed when High Density mode is enabled.
AA Batteries: runtime is displayed with a 5-bar indicator.
Transmitter Setting Icons
Display Icon Transmitter Setting
Bodypack input is attenuated 12 dB
12 dB
Offset gain is added to the transmitter
1 mW RF power level
Lo
10 mW RF power level
Nm
20 mW RF power level
Hi
Menu is locked
M
Power is locked
P
No RF connection between a receiver and transmitter
-No Tx-
or transmitter OFF
④ Menu Lock Indicator
Indicates menu navigation buttons are disabled.
⑤ Mic. Offset
Displays microphone offset gain value.
⑥ RF Power
Displays RF power setting or High Density mode icon (if enabled).
⑦ Bodypack Input Pad
The input signal is attenuated 12 dB.
⑧ Encryption Icon
Indicates encryption is enabled on the receiver and has been transferred
to the transmitter from a sync.
Transmitter
Menu path: >
UTILITY LOCK
Use the transmitter controls to select and lock any of the following transmitter
functions.
• : All menu paths are inaccessible.
MENU LOCK
• : Power switch is disabled
POWER LOCK
Quick-Lock Option: To turn on the transmitter with its power and menu
navigation buttons locked, press and hold the ▲ button during power-on until
the locked message is displayed.
Tip: To unlock the , press the
MENU LOCK
through the following screens:
UTILITY
To unlock the , set the power switch to the
POWER LOCK
press and hold the ▲ button while resetting the power switch to the
position.
button 4 times to pass
ENTER
> >
LOCK MENU UNLOCK
position, then
off
on
13