Tips; Listening To Fm Broadcasts - Denon AVR-X2000 Owner's Manual

Contents

Listening to FM broadcasts

1
Press TUNER to switch the input source to "TUNER".
TUNER
CH 1
Tune
TUNE+/-
GDisplay of this unitH
01 FM 87.50MHz
2
Press TUNE + or TUNE – to select the station you want
to hear.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
Front panel Display
Connections Playback
GTV ScreenH
STEREO AUTO
Now Playing
FM 87.50MHz
Preset Option
CH / OPTION
Rear panel
Settings
%
• The modes for receiving FM broadcasts consists of "Auto" mode that automatically
searches available broadcast stations and "Manual" mode that lets you tune in
using buttons to change the frequency. The default setting is "Auto". You can also
use "Direct Tune" to tune in by entering the frequency directly.
In "Auto" mode, you cannot tune in to radio stations if the reception is not good. If
this is the case, then use the "Manual" mode or "Direct Tune" to tune in.
Operation buttons
TUNE +, –
CH/PAGE df
FAVORITE STATION
1 – 3
52
Remote

Tips

Appendix
Function
Tuning (up/down)
Preset channel selection
Call up favorite stations
(Press and hold)
Add to the favorite stations
Index