Additional speaker fall prevention measures
To prevent the speakers from falling, it is recommended, as an additional protection
measure, to attach the speakers to the wall or table with a fall prevention cord (hereafter
"cord").
≥ Consultation with a qualified installation specialist concerning the appropriate procedure when attaching to a concrete wall or
a surface that may not have strong enough support is recommended (
to the wall and speakers, and personal injury.
≥ Use a cord that is capable of supporting over 10 kg (with a diameter of about 1.5 mm).
≥ The speaker fall prevention measure is to minimize the possibility of damage and harm, but it does not completely guarantee this effect.
≥ Keep the screws out of reach of children to prevent swallowing.
≥ Make sure that the slack of the cord is minimal.
≥ Depending on the placement of the speakers, the screwing position of the screw eye may differ.
When attaching the speakers horizontally
Wall mounting
C
On a table
A Cord*
* If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about
10 mm apart from the tip, at an angle of 45
20
RQT9785
B
A
B Screw eye
C Wall
12, 15). Improper attachment may result in damage
C
(as illustrated above).
o
A