AT&T 1160 User Manual page 8

91-5387-30-00_ATT1460_R1
3 Charge the handset battery.
Place the handset in the base. Charge the battery for at least 12
hours the first time.
4 Check for dial tone.
After the batteries are charged,pick up the handset and press
5 Set the dial mode.
If you have touch tone service,the phone is ready to use as soon as
the batteries are charged.
If you have dial pulse (rotary) service, you'll need to change the dial
mode.
•
•
•
•
•
6 Set Time and Date.
•
•
•
•
•
•
¥
NOTE: You can choose to set the time manually, or you can
allow it to be automatically set with incoming Caller ID
Information.
2003.3.27 10:20 AM
; you should hear a dial tone.
Press on the handset to enter programming mode.
Press or until the screen displays
currently selected mode.
Press . The current setting blinks.
Press or to select
Press , to save the displayed mode.
Press ,then press
displays: . Press
The month is flashing. Press
the correct month. Press
The day is flashing. Press
correct day. Press .
The hour is flashing. Press
correct hour. Press
The minute is flashing. Press
the correct minute. Press
or is flashing. Press
. Press .
Page 5
or .
or until the screen
.
or until the screen displays
.
or until the screen displays the
or until the screen displays the
.
or until the screen displays
.
or to choose between
and the
and
5