91-5387-30-00_ATT1460_R1
TELEPHONE OPERATION
PROBLEM
If you hear a two-beep
signal when you try to
use the handset:
PROBLEM
If the phone does not
ring when you receive
a call:
PROBLEM
If the NEW CALL light
on the base does not go somewhere in your call history. Make sure
off after you review
your Caller ID
information in the call
log:
4 2
2003.3.27
10:21 AM
Page 42
SOLUTION
• You might be out of range. Move close
to the base and try again.
• If moving closer to the base doesn't help,
try following the directions above for re-
initializing the handset and base.
SOLUTION
• Make sure the handset ringer is on.
• Make sure the telephone line cord is
connected firmly to the base and the
telephone jack.
• Make sure the AC adapter is plugged
firmly into an outlet not controlled by a
wall switch.
• You might be too far from the base;move
closer.
• You might have too many extension
phones on your telephone line to allow
all of them to ring. Try unplugging some
of them.
SOLUTION
You may still have unreviewed (new) calls
you review your entire call history.