Powering Up The Server; Powering Down The Server; Extending The Server From The Rack - HP ProLiant DL145 Maintenance And Service Manual

Powering Up the Server

To power up the server, press the Power button.

Powering Down the Server

1. Back up the server data.
2. Shut down the operating system as directed by the operating system documentation.
3. Press the Power button to power down the server. When the server powers down, the
system power LED turns off.
4. Disconnect the power cord.
The system is now without power.

Extending the Server from the Rack

Extend the server on the rack rails until the server rail-release latches engage.
Figure 2-1: Extending the server from the rack
Reverse the steps to restore the server to operating position.
HP ProLiant DL145 Server Maintenance and Service Guide
HP CONFIDENTIAL Codename: eliXir Part Number: 361543-001 Last Saved On: 3/11/04 3:21 PM
WARNING: To reduce the risk of personal injury, electric shock, or damage to the
equipment, remove the power cord to remove power from the server. The front panel
Power button does not completely shut off system power. Portions of the power supply
and some internal circuitry remain active until AC power is removed.
Removal and Replacement Procedures
2-3