Reset System; Safety And Care; Warnings - Oregon Scientific BAR888Ra User Manual

RESET SYSTEM

The RESET button is located inside the main unit
battery compartment. Press RESET when you change
the batteries and whenever performance is not
behaving as expected (for example, unable to establish
radio frequency link with remote sensor or atomic clock).
NOTE When you press RESET, all settings will return
to default value, and you will lose all stored information.

SAFETY AND CARE

Clean the product with a slightly damp cloth and alcohol-
free, mild detergent. Avoid dropping the product or
placing it in a high-traffic location

WARNINGS

This product is designed to give you years of service if
handled properly. Observe the following guidelines:
Never immerse the product in water. This can cause
electrical shock and damage the product.
Do not subject the main unit to extreme force, shock,
or fluctuations in temperature or humidity.
Do not tamper with the internal components.
Do not mix old and new batteries. Do not mix
alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries.
Do not use rechargeable batteries with this product.
Remove the batteries if storing this product for a
long period of time.
Do not scratch the LCD display.
Do not make any changes or modifications to this
product. Unauthorized changes may void your right to
use the product. The technical specification of this
product and contents of this user guide are subject to
change without notice. Images not drawn to scale.
11