Keypad Tone; Reset System - Oregon Scientific AWS899 User Manual

Colour weather station with digital photo frame
Hide thumbs Also See for AWS899:
Table of Contents

Advertisement

7. Select the desired photo (when selected the photo
will be highlighted in blue).
8. Press the
icon at the top right corner on the
display to start the transfer process. If the procedure
has been incorrectly done i.e. the
highlighted.
9. When the process is complete the downloaded photo
will automatically
show
NOTE To switch back to the default weather picture,
press CHANNEL.
AWS899_EN_R13
icon will not be
on the main unit display.
21

KEYPAD TONE

To activate the keypad tone:
1. Navigate to SETTINGS.
2. Select SOUND
Setting
3. Select SILENCE MODE - OFF.
To deactivate the keypad tone follow the instructions
above but select
ON
at point 3.
NOTE If you select SILENCE MODE - ON, both the
keypad tone and the background sound for the weather
forecast will be deactivated.

RESET SYSTEM

The RESET buttons are located on the back of the main
unit and in the battery compartment for the remote unit.
Press these buttons whenever you change the batteries,
or whenever performance is not behaving as expected
(e.g., unable to establish radio frequency link with remote
unit or automatic clock, etc.).
NOTE After resetting the system all system information
will be erased and returned to factory defaults. The main
unit will also check battery condition.
21
3/7/05, 5:36 PM
Mode.

Advertisement

Table of Contents
loading

Table of Contents